PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : La Furia V.2



Peter Kovac
9.January.2011, 06:00
Hi Guys

Its only matter of time...the math is done, now milling, moulding... the first pieces to the team drivers I wanna launch as the season starts.

http://kepfeltoltes.hu/thumb/110109/kp001r_1__www.kepfeltoltes.hu_.jpg (http://kepfeltoltes.hu/view/110109/kp001r_1__www.kepfeltoltes.hu_.jpg)
A képet a Képfeltöltés.hu tárolja. http://www.kepfeltoltes.hu

All of you will be informed.

See ya around the oval...

Peter

maciek.kozlowski@ncm-cs.com.pl
10.January.2011, 21:01
Success in building. I will be diligently he looked out all information about this model.

Maciek & Son

Peter Kovac
27.January.2011, 19:05
Hi Guys

So here we go...

tooling board Axson Technologies LAB 973

and some comparison with the good oldie La Furia V.1

FYI... the new V.2 will be without sprayrails and without any touch on the keel lines. Means as we will find the right setup Ill report it here.

http://kepfeltoltes.hu/thumb/110127/kepek_001_www.kepfeltoltes.hu_.jpg (http://kepfeltoltes.hu/view/110127/kepek_001_www.kepfeltoltes.hu_.jpg)
A képet a Képfeltöltés.hu tárolja. http://www.kepfeltoltes.hu

http://kepfeltoltes.hu/thumb/110127/kepek_002_www.kepfeltoltes.hu_.jpg (http://kepfeltoltes.hu/view/110127/kepek_002_www.kepfeltoltes.hu_.jpg)
A képet a Képfeltöltés.hu tárolja. http://www.kepfeltoltes.hu

http://kepfeltoltes.hu/thumb/110127/kepek_011_www.kepfeltoltes.hu_.jpg (http://kepfeltoltes.hu/view/110127/kepek_011_www.kepfeltoltes.hu_.jpg)
A képet a Képfeltöltés.hu tárolja. http://www.kepfeltoltes.hu

http://kepfeltoltes.hu/thumb/110127/kepek_016_www.kepfeltoltes.hu_.jpg (http://kepfeltoltes.hu/view/110127/kepek_016_www.kepfeltoltes.hu_.jpg)
A képet a Képfeltöltés.hu tárolja. http://www.kepfeltoltes.hu

http://kepfeltoltes.hu/thumb/110127/kepek_013_www.kepfeltoltes.hu_.jpg (http://kepfeltoltes.hu/view/110127/kepek_013_www.kepfeltoltes.hu_.jpg)
A képet a Képfeltöltés.hu tárolja. http://www.kepfeltoltes.hu

Peter Kovac
25.March.2011, 09:50
Hi All

the mould is ready,,, few pieces need to be laminated for the team RS Concept drivers, than you all can free your mind :)

some pics:

http://img25.imageshack.us/i/20110313227.jpg/

http://img705.imageshack.us/i/20110313224.jpg/

http://img339.imageshack.us/i/20110313223.jpg/

Hardy52
25.March.2011, 10:15
The most interesting question to me is what is improved in V2? We have ( or had ) 2 V1s in our group and, to say it politeful, we had not been very amused with the performance.

Florian_R
25.March.2011, 10:58
Hi,

I am using one V.1 as well - and after (ok, it was some work) tuning it runs very well...

But I am interested in the improvements, too:D...

Peter Kovac
27.March.2011, 13:14
Hi all

Pics say more than words.

Comparison Furia V1, Furia V2 and Fuego V2... the diference between the V1 and V2 Furia is significant.


http://img9.imageshack.us/i/resizeof20110327110424a.jpg/

http://img232.imageshack.us/i/resizeof20110327110804a.jpg/

http://img858.imageshack.us/i/resizeof20110327110531a.jpg/

@Hardy

Somebody in the past said once: "The water knows well the physics, we can only learn it"

As I mentioned in the past, the Furias and Fuegos are not exactly good choice for rookies. It needs and takes time to set them up,,, just as any other boat on the market. But as you find it, results can be interesting.... just see the final heat of mono1 at the Worldchampionship 2010 ( 3 Furias against 3 Asian hulls)

thats it.

Hardy52
27.March.2011, 21:43
Ok, Peter, that confirms my idea with the V1 that 30 degrees V is too much since the V2 with about 20 degrees is more flat and probably easier to set up.

Peter Kovac
9.July.2011, 08:15
Hi Guys.

The silence defo finished.

Last weekend we launched the first Furia V2.

http://www.youtube.com/watch?v=OI1ChZ_A3kA

We made some raw setup, sure we will focuse on the sprayrails design and position, but the performance of the new Furia is incredible.

I can defo say, its such kind of revolution of the old Furia V1. Our credo is stability in all conditions at highest speed and consistency.

Pictures of the assembled boat coming soon.

Peter Kovac
28.July.2011, 16:19
Hi Guys.

This evening Ill try to upload more details-pictures incl. dimensions of the Furia V2.

Stay tuned.

P.

Peter Kovac
31.July.2011, 22:49
Hi Mates,,,sorry some objectives.

Prototype E setup:

Motor: Leopard 4pole 2860/3400kV
Cells: 3S 4200mAh 90C (Xenon Power)
ESC: some kind of old Schulze (???) 100Amp...:bang
Prop: TS CNC 36mm
Sprayrails: AeroNaut 8x4 and 6x3mm profiles fixed with thin doubleside tape on the hull.

Basic dimensions:

Motor: 317mm
Stinger center: 44,5mm measured from the partingline on the transom!!!!!!
Offset: 0-1mm right (prototype 0mm)
Stinger lenght: 75mm
Cells position: as far as possible to the rear...sorry I forgot to measure the CG....

http://kepfeltoltes.hu/thumb/110731/IMG00162-20110728-1648_www.kepfeltoltes.hu_.jpg (http://kepfeltoltes.hu/view/110731/IMG00162-20110728-1648_www.kepfeltoltes.hu_.jpg)
A képet a Képfeltöltés.hu tárolja. http://www.kepfeltoltes.hu
http://kepfeltoltes.hu/thumb/110731/IMG00167-20110728-1651_www.kepfeltoltes.hu_.jpg (http://kepfeltoltes.hu/view/110731/IMG00167-20110728-1651_www.kepfeltoltes.hu_.jpg)
A képet a Képfeltöltés.hu tárolja. http://www.kepfeltoltes.hu
http://kepfeltoltes.hu/thumb/110731/SDC13662_www.kepfeltoltes.hu_.jpg (http://kepfeltoltes.hu/view/110731/SDC13662_www.kepfeltoltes.hu_.jpg)
A képet a Képfeltöltés.hu tárolja. http://www.kepfeltoltes.hu
http://kepfeltoltes.hu/thumb/110731/SDC13671_www.kepfeltoltes.hu_.jpg (http://kepfeltoltes.hu/view/110731/SDC13671_www.kepfeltoltes.hu_.jpg)
A képet a Képfeltöltés.hu tárolja. http://www.kepfeltoltes.hu

Peter Kovac
31.July.2011, 22:58
...following

The front sprayrails are paralell on the full lenght of the front section. I add 1mm/60mm of polyester putty on the front section keel to lift up littlebit the step.
On the prototype we did not filled up with polyester putty the sprayrails-hull link, but it gives sence after the finalisation of the setup to do it.
Our steering system has adjustabe lenght to define the correct transom rudder axle distance for exact turnability.

PS: this weekend we will have a 2days competition, after that Ill be able to give some tips regarding this lenght+ turnfin and rudder blade dimensions and sure more exact sprayrails positioning.

http://kepfeltoltes.hu/thumb/110731/SDC13672_www.kepfeltoltes.hu_.jpg (http://kepfeltoltes.hu/view/110731/SDC13672_www.kepfeltoltes.hu_.jpg)
A képet a Képfeltöltés.hu tárolja. http://www.kepfeltoltes.hu
http://kepfeltoltes.hu/thumb/110731/SDC13673_www.kepfeltoltes.hu_.jpg (http://kepfeltoltes.hu/view/110731/SDC13673_www.kepfeltoltes.hu_.jpg)
A képet a Képfeltöltés.hu tárolja. http://www.kepfeltoltes.hu
http://kepfeltoltes.hu/thumb/110731/SDC13674_www.kepfeltoltes.hu_.jpg (http://kepfeltoltes.hu/view/110731/SDC13674_www.kepfeltoltes.hu_.jpg)
A képet a Képfeltöltés.hu tárolja. http://www.kepfeltoltes.hu

Peter Kovac
31.July.2011, 23:00
...following

Some details...could help.

http://kepfeltoltes.hu/thumb/110731/Resize_of_2011_0701_202354AA_www.kepfeltoltes.hu_. jpg (http://kepfeltoltes.hu/view/110731/Resize_of_2011_0701_202354AA_www.kepfeltoltes.hu_. jpg)
A képet a Képfeltöltés.hu tárolja. http://www.kepfeltoltes.hu
http://kepfeltoltes.hu/thumb/110731/Resize_of_2011_0701_202409AA_www.kepfeltoltes.hu_. jpg (http://kepfeltoltes.hu/view/110731/Resize_of_2011_0701_202409AA_www.kepfeltoltes.hu_. jpg)
A képet a Képfeltöltés.hu tárolja. http://www.kepfeltoltes.hu
http://kepfeltoltes.hu/thumb/110731/SDC13670_www.kepfeltoltes.hu_.jpg (http://kepfeltoltes.hu/view/110731/SDC13670_www.kepfeltoltes.hu_.jpg)
A képet a Képfeltöltés.hu tárolja. http://www.kepfeltoltes.hu
http://kepfeltoltes.hu/thumb/110731/SDC13675_www.kepfeltoltes.hu_.jpg (http://kepfeltoltes.hu/view/110731/SDC13675_www.kepfeltoltes.hu_.jpg)
A képet a Képfeltöltés.hu tárolja. http://www.kepfeltoltes.hu

Peter Kovac
31.July.2011, 23:09
...following

Soory for the chaos...
I have modded the rear keel...3angle sanding, BUT I think we will fill it back to the origin shape V and slightly round it to get just a peanut of lift at the rear section.

http://kepfeltoltes.hu/thumb/110801/SDC13661_www.kepfeltoltes.hu_.jpg (http://kepfeltoltes.hu/view/110801/SDC13661_www.kepfeltoltes.hu_.jpg)
A képet a Képfeltöltés.hu tárolja. http://www.kepfeltoltes.hu
http://kepfeltoltes.hu/thumb/110801/SDC13666_www.kepfeltoltes.hu_.jpg (http://kepfeltoltes.hu/view/110801/SDC13666_www.kepfeltoltes.hu_.jpg)
A képet a Képfeltöltés.hu tárolja. http://www.kepfeltoltes.hu
http://kepfeltoltes.hu/thumb/110801/SDC13668_www.kepfeltoltes.hu_.jpg (http://kepfeltoltes.hu/view/110801/SDC13668_www.kepfeltoltes.hu_.jpg)
A képet a Képfeltöltés.hu tárolja. http://www.kepfeltoltes.hu
http://kepfeltoltes.hu/thumb/110801/SDC13676_www.kepfeltoltes.hu_.jpg (http://kepfeltoltes.hu/view/110801/SDC13676_www.kepfeltoltes.hu_.jpg)
A képet a Képfeltöltés.hu tárolja. http://www.kepfeltoltes.hu

STAY TUNED*bunny*!!!